How Much Do Aluminium Doors Cost in Sydney?

If you’re comparing prices before you renovate, extend, or simply replace a tired old door, it helps to know roughly what you’re working with before you start calling around for quotes. Here’s an honest breakdown of what drives the cost of aluminium doors in Sydney, what a fair quote should include, and where the numbers below come from.

Indicative Aluminium Door Prices in Sydney

The table below is a September 2026 budgeting guide, prepared as a general indication only — not a guaranteed Prime Aluminium Solution quotation. Every figure is supply-and-install and includes GST.

Included: straightforward ground-floor replacement, basic delivery, removal and disposal of the existing door, standard installation, sealing and standard finishing.
Excluded: structural alterations, brick cutting, difficult access or scaffolding, premium colours, specialised or double glazing, security or retractable screens, electrical work, and approval costs.
Larger openings, premium systems and more complex building work can push a project beyond these ranges. Final pricing always requires an onsite measure and a written, project-specific quote.

What Affects the Final Cost

A handful of variables move the price of any aluminium door up or down from the indicative ranges above:

• Door type and configuration — a two-panel slider costs less than a four-panel bi-fold across the same opening, simply because there’s more frame, more hardware and more labour involved.
• Opening width and height — larger openings need more material and, often, heavier-duty hardware to carry the extra weight.
• Glazing — single glazing sits at the lower end; double glazing, tinted, laminated or acoustic glass all add cost. See our custom glass options if you’re weighing up glazing upgrades.
• Hardware and locking — multi-point locking systems and heavier-duty tracks cost more than basic hardware.
• Frame colour and finish — a standard powder-coat colour may be included, while premium or custom finishes can add to the price.
• Flyscreens — retractable or fixed screens are commonly quoted as an add-on rather than included as standard.
• Removal and site conditions — removing an existing door on a ground floor with clear access is straightforward; a second-storey install, a narrow side gate, or brickwork that needs cutting back all add time and cost.

Comparing Your Door Options

There isn’t one “best” aluminium door — it depends on your opening, how you use the space, and how much clear access you want when it’s open.

If you’re deciding specifically between stacker and bi-fold doors, our dedicated guide on stacker doors vs bi-fold doors walks through the decision factors — daily usage, panel parking space, and site exposure — in more detail. And if a sliding door is more your speed, see our guide to sliding doors for what to expect from the system itself.

Why Supply-Only Advertised Prices Aren’t the Final Installed Cost

You’ll see plenty of “from” prices for aluminium doors advertised online, and some of them look a lot cheaper than the ranges above. In most cases, that’s because they’re supply-only figures — the cost of the door system itself, with no allowance for removal of your old door, installation labour, sealing, finishing or disposal.

This guide compares complete supply-and-install pricing. A supply-only figure does not cover the same scope. If you need supply only or installation only, state that when you enquire and confirm availability, measuring responsibility, delivery and exclusions in writing. When comparing quotes, check whether installation, removal and disposal are included so you are comparing like for like.

If any of these are missing from a quote, ask for them before you compare it against another.

A Few NSW Considerations

Depending on your property and the scope of work, a few regulatory factors may apply — they won’t apply to every project, so it’s worth checking your specific situation rather than assuming. If you live in a strata scheme, some door replacements can require owners corporation approval; the NSW Government’s strata renovations guide is a useful starting point for checking what applies to you.

Glass used near doors is also generally expected to meet the AS 1288 safety glazing standard where it falls within impact-risk locations, and aluminium door systems are commonly assessed against the AS 2047 performance standard for windows and external glazed doors. Whether either applies in full to your specific job depends on the product and location — your installer should be able to confirm this for your project.

How to Get an Accurate Quote

Because so much depends on your specific opening and site, the fastest way to a genuinely accurate number is an onsite measure. Before you get in touch, it helps to have:

• The width and height of the opening (even a rough measurement helps)
• Photos of the existing door or opening, from both inside and outside
• Notes on access — stairs, narrow side gates, upper floors, or anything that might make delivery or installation trickier
• A sense of the door type, colour and glazing you’re leaning towards

We won’t quote a fixed installation timeframe here, because it genuinely depends on the door configuration, how much removal work is involved, site access, and general site conditions on the day — your written quote will set out realistic timing once we’ve seen the job.

Frequently Asked Questions